Search
Now showing items 1-9 of 9
Effects of surface tension and binary diffusion on pool boiling of dilute solutions - An Experimental assessment
(American Society of Mechanical Engineers, 1999-01-13)
Pool boiling heat transfer with dilute binary mixtures introduces two additional effects due to binary diffusion, and due to change in the surface tension. The secondary effects due to changes in contact angle and wetting ...
Heat transfer characteristics in partial boiling, fully developed boiling, and significant void flow regions of subcooled flow boiling
(American Society of Mechanical Engineers, 1998-05)
Subcooled flow boiling covers the region beginning from the location where the wall temperature exceeds the local liquid saturation temperature to the local where the thermodynamics quality reaches zero, corresponding to ...
Boiling heat transfer with binary mixtures: Part II — Flow boiling in plain tubes
(ASME, 1998)
Flow boiling heat transfer with pure fluids comprises convective and nucleate boiling
components. In flow boiling of binary mixtures, in addition to the suppression effects
present in pool boiling, the presence of flow ...
Boiling heat transfer with binary mixtures: Part I— A theoretical model for pool boiling
(ASME, 1998)
Experimental evidence available in the literature indicates that the pool boiling heat
transfer with binary mixtures is lower than the respective mole- or mass-fraction averaged
value. Although a few investigators have ...
A Control volume approach for investigating forces on a departing bubble under subcooled flow boiling
(ASME, 1995)
This paper presents the theoretical and experimental work conducted on nucleating
vapor bubbles in subcooled flow boiling of water at atmospheric pressure and 60 degrees C
in a 3 mm X 50 mm X 400 mm long rectangular ...
A Model for correlating flow boiling heat transfer in augmented tubes and compact evaporators
(American Society of Mechanical Engineers, 1991-11)
Development of a flow boiling map for subcooled and saturated flow boiling of different fluids inside circular tubes
(American Society of Mechanic Engineers, 1991-02)
The thermal behavior of a flow boiling system is represented by a flow boiling map to illustrate visually the relationships among various system parameters. An earlier flow boiling map Collier (1981) does not include the ...
A Model for flow boiling heat transfer in augmented tubes and compact evaporators
(American Society of Mechanical Engineers (ASME), 1990-11)
The additive model of the convective and the nucleate boiling components employed in the Kandlikar correlation (1990a) for flow boiling in smooth tubes is extended to augmented tubes and compact evaporators. Two augmentation ...
A General correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes
(American Society of Mechanical Engineers, 1990-02)
A simple correlation was developed earlier by Kandlikar (1983) for predicting saturated flow boiling heat transfer coefficients inside horizontal and vertical tubes. It was based on a model utilizing the contributions due ...