Search
Now showing items 21-30 of 88
High flux heat removal with microchannels — A Roadmap of challenges and opportunities
(Taylor & Francis, 2005)
Heat fluxes in IC chips and other electronics equipment have reached the current limits of air-cooling technology. Some of
the applications require heat fluxes well beyond the limit of 100 W/cm2, thus demanding advanced ...
On the nature of critical heat flux in microchannels
(American Society of Mechanical Engineers, 2005-01)
The critical heat flux (CHF) limit is an important consideration in
the design of most flow boiling systems. Before the use of microchannels
under saturated flow boiling conditions becomes widely
accepted in cooling of ...
Experimental study of flow patterns, pressure drop, and flow instabilities in parallel rectangular minichannels
(Taylor & Francis, 2005)
Flow boiling heat transfer in parallel minichannels and microchannels is one of the solutions proposed for cooling high
heat flux systems. The associated increase in the pressure drop poses a problem that needs to be ...
An Experimental investigation of flow boiling characteristics of water in parallel microchannels
(American Society of Mechanical Engineers, 2004-08)
Microchannels are being considered in many advanced heat transfer applications including
automotive and stationary fuel cells as well as electronics cooling. However, there are
a number of fundamental issues from the ...
Numerical study of an evaporating meniscus on a moving heated surface
(American Society of Mechanical Engineers (ASME), 2004-07)
The present study is performed to numerically analyze an evaporating meniscus on a moving heated surface. This phenomenon is similar to the one observed at the base of a vapor bubble during nucleate boiling. The complete ...
Effect of entrance condition on frictional losses and transition to turbulence in minichannel flows
(American Society of Mechanical Engineers (ASME), 2004-06)
In studying the fluid flow and heat transfer in
microchannels and minichannels, various claims have been
made regarding transition at Reynolds numbers significantly
below 2300. As a first step in identifying the reasons ...
Optimization of microchannel geometry for direct chip cooling using single phase heat transfer
(American Society of Mechanical Engineers (ASME), 2004-06)
Direct cooling of an electronic chip of 25mm x 25mm
in size is analyzed as a function of channel geometry for
single-phase flow of water through small hydraulic
diameters. Fully developed laminar flow is considered ...
Effect of gravitational orientation on flow boiling of water in 1054 x 197 micron parallel minichannels
(American Society of Mechanical Engineers (ASME), 2004-06)
Microchannels and minichannels are being considered for high heat flux applications under microgravity environment in space missions. Due to the small hydraulic diameter, the effect of gravitational forces on flow boiling ...
Experimental study of flow patterns, pressure drop and flow instabilities in parallel rectangular minichannels
(American Society of Mechanical Engineers (ASME), 2004-06)
The use of phase change heat transfer in parallel minichannels and microchannels is one of the solutions proposed for cooling high heat flux systems. The increase in pressure drop in a two phase system is one of the problems, ...
Numerical simulation of growth of a vapor bubble during flow boiling of water in a microchannel
(American Society of Mechanical Engineers (ASME), 2004-06)
The present study is performed to numerically analyze growth of a vapor bubble during flow of water in a microchannel. The complete Navier-Stokes equations along with continuity and energy equations are solved using the ...