Search
Now showing items 1-10 of 66
RIT Undergraduate Symposium 2008
(Rochester Institute of Technology, 2008-08)
The Undergraduate Research Symposium was founded to honor student achievement in scientific research and to further RIT's goal of combining traditional laboratory work and classroom instruction with experiential learning. ...
Numerical study of an evaporating meniscus on a moving heated surface
(Journal of Heat Transfer, 2006-12)
The present study is performed to numerically analyze an evaporating meniscus bounded
between the advancing and receding interfaces on a moving heated surface. The numerical
scheme developed for analyzing interface motion ...
Review of fabrication of nanochannels for single phase liquid flow
(Springer Verlag, 2006-05)
Abstract The topic of single phase liquid flow in submicron
or nanochannels is a nascent field. There have
only been a couple papers that have dealt with this area
directly. The most probable reason for this is that ...
Development of an experimental facility for investigation single-phase liquid flow in microchannels
(Taylor & Francis, 2006-05)
An experimental facility has been developed to investigate single-phase liquid heat transfer and pressure drop in a variety of
microchannel geometries. The facility is capable of accurately measuring the fluid temperatures, ...
Stabilization of flow boiling in microchannels using pressure drop elements and fabricated nucleation sites
(Taylor & Francis, 2006-04)
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution in the channels. The vapor phase exists as nucleating bubbles, dispersed bubbles, elongated ...
Nucleation characteristics and stability considerations
(Elsevier Science B.V., 2006)
Flow boiling in microchannels and minichannels has received considerable attention in the past decade. The interest stems from the
possibility of achieving the extremely high heat fluxes, over 1 kW/cm2, needed for future ...
Effect of liquid-vapor phase distribution on the heat transfer mechanisms during flow boiling in minichannels and microchannels
(Taylor & Francis, 2006)
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution
in the channels. The vapor phase exists as nucleating bubbles, dispersed bubbles, elongated ...
Effects of liquid-vapor phase distribution on the heat transfer mechanisms during flow boiling in minichannels and microchannels
(Taylor & Francis, 2006-01)
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution
in the channels. The vapor phase exists as nucleating bubbles, dispersed bubbles, elongated ...
Numerical study of the effect of inlet constriction on bubble growth during flow boiling in microchannels
(American society of mechanical engineers (ASME), 2005-06)
Flow boiling through microchannels is characterized by
nucleation of vapor bubbles on the channel walls and their
rapid growth as they fill the entire channel cross-section. In
parallel microchannels connected through ...
Numerical simulation of flow through microchannels in bipolar plate
(American society of mechanical engineers (ASME), 2005-06)
In this paper, the flow through a serpentine microchannel
with obstructions on wall is studied. Various obstruction geometries
ranging from rectangular to triangular are considered. For
each geometry pressure drop across ...